AccuTech 10/22 Barrel Pusher at EABCO - Ruger 10/22 Barrel Replacement Tool Pushes Barrel Out of Receiver
Ruger 10/22 Home * Ruger 10/22 Barrels * Ruger 10/22 Stocks * Ruger 10/22 Magazines |
Ruger 10/22 Barrel Pusher...The Easiest Way to Remove and Replace Ruger 10/22 Barrels!Replacing a Ruger 10/22 barrel can sometimes be difficult if the barrel sticks tight in the receiver. 10/22 barrels are not threaded so if a barrel doesn't pull out of the receiver easily, you'll usually need a barrel vise and a twisting and pulling session to get it off... NOT ANYMORE! This new 10/22 Barrel Pusher tool uses mechanical advantage to gently and safely push a sticking barrel straight out of the receiver. Just mount this tool into your 10/22 receiver and start tightening the hex screw. The nylon pusher will press the barrel completely outward. (Click Instructions PDF) The 10/22 Barrel Pusher is designed to align properly using anchor points in the 10/22 receiver, It won't scratch or dent the barrel or the receiver, either. |
 Info/Order 10/22 Barrel Pusher $42 |
   |
