aligns each cartridge for straight in,
smooth chambering with no limits on bullet seating
depth. There's also no gouging, kinking, or denting
of your carefully prepared hand loads... Or, deforming
of the bullet tip.
Installation is Easy - Insert the Benchrest Follower
in the magazine box from the bottom so that it will
rest on top of the factory follower after closing the
floor plate. Rifles with a blind magazine box or
without a hinged floor plate require removing the
barreled action from the stock... then putting it back
together with the Benchrest Follower. |
- Click On the Photos Above to Enlarge -
Single Shot Magazine Followers
Please Click "INFO" for Complete Fitting
Information
INFO 020-423 Savage Short Follower $11
INFO 020-424 Savage Medium Follower $11
INFO 020-426 Savage Long Follower $11
More
Followers are Listed Below...
|