Target Shooting Rest - Rifle Rests Make Accuracy Easier and More Load Testing, Shooting Groups and Varmints.
Shooting Rests and Accessories *
Bipod Rifle Rests * Hoppes Shooting Rest *
Caldwell Rifle
Rests
|
© 2007-2008 E. Arthur Brown Co., sales@eabco.com, 4088 County Road 40 NW,
Garfield, MN 56332
ph. 320-834-3000, FAX 320-834-3002 , Orders Only
Toll Free 1-800-950-9088 Standard BF Pistols
A Shooting Rest that Really Works...
These Target Shooting Rests were Designed to Eliminate Shooter Error and Tighten Groups| Shooting well from a typical sand bag rest is not as easy as it sounds. Recoil and tension in holds cause inconsistencies that get even worse when your sandbag moves around or changes shape with each shot. If you really want to see how accurate your rifle is... To see just how small a group you're capable of shooting... You need a serious shooting rest. These Target Shooting Rests are as serious as it gets... In fact, they are so good they're not allowed in formal benchrest competitions. |  
Model TS500 (left) and Model TS1000 (right) |
| Rigid Front and Rear Alignment - The secret to removing shooter induced tension from your hold is for the shooting rest to align both the front and rear of the rifle... Rigidly. This requires wobble-free rest fixtures mounted with precision into physically heavy base castings. The result is a steady rifle rest that repeats the same hold from shot to shot. |
|
|
TS500 Rifle Rest -
This original
design is the favorite of hand loaders and prairie dog
shooters. It is so absolutely stable! The fine threaded
elevation adjustment tightens reliably so there's
no wobble. Length from front to rear is adjustable for
any rifle. It holds still and stays put for shot after
shot consistency when shooting groups. And the front
rest swivels for pivot rest shooting without the rear
(when the prairie dogs are popping up everywhere!)
Quality is paramount in the construction of the TS500. Cradles and base castings are heavy duty, powder coated. Cradles are custom leather lined. Rear cradle adjusts for both elevation and angle. Rails are flex resistant, high pressure zinc tubing. Non-Slip vinyl feet. Weight is 11 lbs. |
TS1000 Rifle Rest - Taking the front/rear concept
even further, this rest has zero backlash windage
adjustment, adjustable feet and a bubble level for
leveling. Rest blocks are adjustable to fit your
forend and lined with low friction felt. Plastic foot
pads can be removed to reveal hardened spikes for
shooters who prefer spike feet. The rails are solid
steel and squared for maximum front to rear rigidity.
Exceptional quality can be seen everywhere on the TS1000 Rifle Rest. The front rest elevation adjustment rides on fine needle bearings. The windage adjustment runs on acme threads for zero backlash and positive, dial-in zero. All cradle, rest, and base castings are heavy duty, powder coated. Knurled adjustment nuts. Weight is 15 lbs. |