Warne Scope Mounts - Quick detach Warne rings and bases, fixed rings and reference chart

Warne Tactical Mounts * Interlock MountsScope Gadgets  * Brown 97D Riflescope
Thompson Center * 97D Rifles * CVA Scope Mounts * ViewCart/CheckoutHome Page

Site Search
©2001-2008 E. Arthur Brown Co., sales@eabco.com, 4088 County Road 40 NW, Garfield, MN 56332
ph. 320-834-3000, FAX 320-834-3002 , Orders Only Toll Free 1-800-950-9088

Warne Scope Mounts - Please Scroll Down

By Eben Brown
  Alignment, rigidity, and strength… these are the Big Three requirements of a top quality scope mount. Our Warne Steel Scope Mounts do all that and look beautiful, too!
  Alignment - Manufactured by a well-proven and consistent forming process, Warne rings and bases are exactly the same from one production run to the next. Proper alignment is natural when parts are identical. And it results in less scope tension and better shooting accuracy.
  Rigidity - The design, material, and mass of Warne mounts combine to make a mount that’s as close to zero flex as is scientifically possible. This rigidity protects your scope while it enhances the accuracy of your shooting.
  Strength - Four screws and a wide surface area hold your scope into each Warne ring. Also on each ring, there’s a stainless steel recoil key that fits (like a glove) into a slot on the mounting base. Finally, the base(s) are mounted with tempered steel Torx® screws. That's STRONG.
Warne03.gif (54606 bytes)
Warne02.gif (16955 bytes)Warne04.gif (37176 bytes)
Scroll Down to Order Bases and Rings
  Standard Fixed Steel Rings
Simple, incredibly strong and rigid
for permanent scope installations.
  Quick Detach (QD) Steel Rings
A locking lever on the side lets you take your
scope on and off your gun without losing the zero.  Questions? Call us at 800-950-9088
       

Warne Steel 1" Rings and
 Standard* Bases Reference Chart

*Note: If you don't see your gun here see our Warne Chart or call 1-800-950-9088 to ask
for help...  We have a bunch more bases and base combinations to fit most firearms.
Order
Number
Finish Ring Height Ring
Ht.
Pair
Price
Order
Number
Finish Base Fits Firearm Our
Price
200M Matte Low, Fixed .250” $27.95 M858/918M Matte Ruger 10/22 $19.95
200S Silver Low, Fixed .250” $32.95 M858/918S Silver Ruger 10/22 $22.95
201M Matte Medium, Fixed .375” $27.95 M918/918M Matte Browning A-Bolt $19.95
201S Silver Medium, Fixed .375” $32.95 M918/918S Silver Browning A-Bolt $22.95
202M Matte High, Fixed .525” $27.95 M902/876M Matte Remington 700 $19.95
202S Silver High, Fixed .525” $32.95 M902/876S Silver Remington 700 $22.95
203M Matte Extra-High, Fixed .650” $46.95 M902/801M Matte Remington Model 7 $19.95
203S Silver Extra-High, Fixed .650” $52.95 M902/801S Silver Remington Model 7 $22.95
200LM Matte Low, Quick Detach .250” $52.95 See Below Matte Savage Bolt Guns (Order Below) $19.95
200LS Silver Low, Quick Detach .250” $57.95 Scroll Down Silver Savage Bolt Guns (Order Below) $22.95
201LM Matte Medium, Quck Detach .375” $52.95 M902/924M Matte Winchester Model 70 $19.95
201LS Silver Medium, Quck Detach .375” $57.95 M902/924S Silver Winchester Model 70 $22.95
202LM Matte High, Quick Detach .525” $52.95 M988M Matte BF/M97D/Contender $32.95
202LS Silver High, Quick Detach .525” $57.95 M988S Silver BF/M97D/Contender $34.95
203LM Matte Extra High, Qck Dtch .650” $67.95 M987M Matte Thompson Encore $32.95
203LS Silver Extra High, Qck Dtch .650” $71.95 M987S Silver Thompson Encore $34.95
204LM Matte Ultra-High, Qck Dtch .935” $67.95
204LS Silver Ultra-High, Qck Dtch .935” $71.95

Special Information for Savage Bolt Guns

 "Pre-AccuTrigger" means the receiver is FLAT at the rear and round at the front. "AccuTrigger" means the receiver is ROUND at the rear and round at the front. These are two piece bases that will fit either long or short action. But you need to look at the top of your receiver to be sure whether it is flat or round on top and order the right set of bases.

ORDER 134-M902-902M Savage Bases AccuTrigger Matte $19.95
ORDER 134-M902-902S  Savage Bases AccuTrigger Silver $22.95
ORDER 134-M902-936M Savage Bases Pre-AccuTrigger Matte $19.95
ORDER 134-M902-936S Savage Bases Pre-AccuTrigger Silver $22.95


EABCO Home * Checkout * View Shopping CartShipping/Ordering Info * Join NRA * Free Tech Reports * Email Bargains
E. Arthur Brown Company, Inc, sales@eabco.com, 4088 County Road 40 NW, Garfield, MN 56332
ph. 320-834-3000, FAX 320-834-3002 , Orders Only Toll Free 1-800-950-9088