Custom Cartridge Brass
.219 Donaldson Wasp, 6mm Wasp, 7mmUS, 6.5mm US, 357 Herrett, 7-30 Waters, 6.5mm BR Magnum, 7mm BR Magnum, 300 BR Magnum, 30 Herrett, and 375 Winchester.We got into making custom brass when we introduced the 7mmUS cartridge. Since 7mmUS is derived from the .219 Donaldson Wasp, it's only natural to also make the .219DW. 7-30 Waters and 30 Herrett we added at the request of customers. And .375 Winchester we make up for our .375 Winchester Match as well as standard .375 Winchester guns. All of our brass is made from 30-30 Winchester bulk brass. It is formed and trimmed to length. You should expect to full length size it and some minor trimming might be in order. 7-30 and .375 and the BRMs are a little shorter than spec as we widen out the original 30-30 enough that it draws brass from the length. But, they are completely functional and accurate at the length provided.
Bench Rest Magnum Brass and Dies - These cartridges were developed to give big game hunting performance to small frame firearms like the T/C Contender, Brown BF Pistol, and Brown Model 97D Rifle. The BR Magnum philosophy is described in detail in our free technical reports.
Also Bench Rest Magnum load data is available... click here. We offer custom formed, ready to load brass for 6.5mm BRM, 7mm BRM, and 300 BRM. 6mm BRM and 224 BRM are made by full length sizing the 6.5mm BRM in their respective sizing dies.
6.5mm BRM Brass $89/100 - Derived from the original 219 Donaldson Wasp bench rest competition cartridge, 6.5mm BRM has the same highly efficient shape only its slightly longer to allow for about 10 grains more powder... Which makes it a "magnum" capacity on the original bench rest cartridge... Thus "Bench Rest Magnum" or "BRM. The 6.5mm BRM cartridge is a modern, high efficiency cartridge with performance similar to the original 6.5x55 Swedish Mauser. It is our most popular chambering in our Model 97D Rifles, TC Encore Accuracy Barrels, and TC Contender and G2 Accuracy Barrels.
Info/Order 127-262 6.5mm BRM Brass (100) $89
Info/Order 127-261 6.5mm BRM Reloading Dies $60
Info/Order 129-397106 VLD and AMAX Seating Stem $9.95
219 and 6mm Donaldson Wasp Brass $89/100 - Originally derived from 219 Zipper, the 219 Donaldson Wasp is a .224 caliber Benchrest cartridge developed by Harvey Donaldson. It is often credited with being the "Godfather of Bench Rest Cartridges" because the case capacity and 30 degree shoulder have been carried over to the modern "BR" cartridges. Our brass is formed in four steps from brand new Remington 30-30 cases and then cut to length. It's ready-to-load like any standard cartridge brass. This brass can also be formed into 6mm Wasp by full length sizing in a 6mm Wasp sizing die.
Order/Info127-219 Donaldson Wasp Brass(100) $89
Order/Info 722-80403 Redding 219 Don Wasp Reloading Dies $79
6mm PPC and 22 PPC Brass - These two cartridges have dominated international bench rest shooting on brass formed from Lapua 220 Russian. Both 6mm and 22 PPC are made by full length sizing the Lapua 220 Russian brass in the 6 or 22 PPC sizing die. After that, you load and fire-form to fill out the shoulder of the case. Lapua is beautiful, consistent brass that shoots accurately.
ORDER 810-4PH5013 Lapua 220 Rusn Brass 100 $85 (Volume Pricing Click Here)
ORDER 722-80319 Redding 6mm PPC (USA) Reloading Dies $42
ORDER 722-80318 Redding 22 PPC (USA) Reloading Dies $42
7mm Ultimate Silhouette Brass $89/100- Originally developed as a rimmed handgun metallic silhouette cartridge for IHMSA competition in our BF Pistols. The 7mm US is the Bench Rest 219 Donaldson Wasp necked up to 7mm. Our 7mm US Brass is made from brand new 30-30 Winchester 30-30 brass. This brass can also be formed to 6.5mm US or 357 Herrett by just full length sizing in their respective sizing dies. 7mm US Reloading Data Click Here.
ORDER 127-7US 7mmUS Brass (100) $89
ORDER 127-7UD 7mmUS Reloading Dies $60
7-30 Waters Brass $89/100 - Originally developed (by Ken Waters) as a faster and flatter shooting flat nose cartridge for Winchester lever action rifles, the 7-30 Waters has gained wider popularity among handloaders who shoot spitzer bullets in single shots. Our 7-30 Waters is made from brand new Winchester 30-30 brass with a full body and the shoulder in the correct position.
ORDER 127-730 7-30 Waters Brass (100) $89
ORDER 722-80230 Redding 7-30 Waters Reloading Dies $69
30 Herrett Brass $89/100 - Originally developed by Steve Herrett of Herretts Grips, the 30 Herrett is one of the first bottleneck hunting cartridges designed specifically for the short barrels of single shot handguns. Very efficient and accurate. Our brass is made from brand new Winchester 30-30 brass formed and shortened to 30 Herrett cartridge dimensions.
ORDER 127-30H 30 Herrett Brass (100) $89
ORDER 121-90554 Lee 30 Herrett Custom Reloading Dies $59
375 Winchester Brass $89/100 - Originally developed as a "Big Bore" cartridge for 30-30 style lever action rifles, the 375 Winchester has proven itself very versatile in single shot handguns and rifles. The availability of original ".375 Win" headstamped brass has been disappointing however. We make our 375 Winchester brass from readily available brand new Winchester 30-30 brass. Reload life depends on the pressure of your loads and the looseness of your chamber. Our BF Pistols and Model 97 Rifles are chambered to fit this brass and high performance rounds get plenty of reloads.
ORDER 127-375 .375 Winchester Brass (100) $89
ORDER 722-80206 Redding .375 Winchester Reloading Dies $69