The Pod-Loc Lever fits S style Harris Bipods for easier and quicker adjustment of canting tension
Harris Bipods Home Page * Harris Bipod Clone * Harris Bipod M4 Adaptor * Model 97D Rifles
|
©2006 E. Arthur Brown Co., sales@eabco.com, 4088 County Road 40 NW,
Garfield, MN 56332
ph. 320-834-3000, FAX 320-834-3002 , Orders Only Toll Free
1-800-950-9088
Pod Loc™ for Harris Bipods - Easy Tension Adjustment
The Pod-Loc Lever fits S style Harris Bipods for easier and quicker adjustment of canting tension|
The Harris "S" type bipod allows you to tilt or cant your rifle side to side to
level your crosshairs. It's a great system.
However, the friction tensioning knob is hard to
adjust with your fingers. Our new Pod-Loc™
Tension Lever replaces the friction tensioning knob
to give you much better control and leverage.
Pictured top left is the standard Harris S-type bipod. Top right is the same bipod with Pod-Loc™ lever installed. And pictured at bottom is a Model 97D Rifle with a Pod-Loc Harris Bipod. Click on the pictures to enlarge and show detail. The Pod-Loc lever can also be released and re-positioned after you've adjusted it. The Pod-Loc installs easily on all "S" type Harris bipods (sorry it does NOT fit our clone bipods). Photo instructions are included. Unscrew the friction nut and replace with Pod-Loc Lever... Order Your's Today! Pictured Right: 97D Rifle w/Podlock and Harris Bipod |
 
 |
New! S-Lever Only $16.95For Harris OR Shooters Ridge S-Type Bipods... See Below |
ORDER 012-001 Pod-Loc Tension Lever for Harris S Bipods $24*Package Deal* - When You Order with a New Harris S Bipod!ORDER 012-001P Package Price Pod-Loc Tension Lever $20 |
New! S-Lever Bipod Lock for S-Type Bipods Works Like the Pod-Loc™
This New Lever Is Nearly Identical to the PodLoc and Has Versions for BOTH Harris and Shooters Ridge Bipods The Harris and Shooters Ridge
"S" type bipods allow you to tilt or cant your rifle side to side to level
your crosshairs. It's a great system. However, the friction tensioning knob
is hard to adjust with your fingers. |
Our new S-Lever Tension Lever is an
economical replacement for the friction tensioning knob to give you much
better control and leverage. Pictured top left is the standard Shooters Ridge S-type bipod. Top right is the same type of bipod with an S-Lever installed. The S-Lever can also be released and re-positioned after you've adjusted it. Made of fiber reinforced nylon (just like the Pod-Loc™), the S-Lever is designed to flex or break off if it gets over-tightened or hung up on something in the field. The Harris S-Lever installs on "S" type Harris and XLA bipods. The Shooters Ridge S-Lever installs on "S" type Shooters Ridge bipods. Installs easily. Unscrew the friction nut and replace it with an S-Lever, complete instructions included... Order Your's Today! |
Info/Order S-Lever for Harris S-Type Bipod $16.95 |
Info/Order S-Lever for Shooters Ridge S-Type Bipod $16.95 |