Savage Rifle Barrels by EABCO - Custom Savage Accuracy Barrels with Fast Gunsmith Installation! It's easy to upgrade your Savage bolt action rifle to an EABCO Accuracy Barrel... In most cases we'll have your rifle finished within 1-2 weeks here at our shop. That's because we already have the barrels made up and ready to install... Please scroll down for "General Barrel Information" on length, contour, etc. Precision Barrel Blanks - An EABCO barrel blank is precision gun drilled from the best Chromoly steel alloys. Bore dimensions are reamed consistent to airgauge within .0002 (2/10,000ths) of proper bore dimension. These are then Two-Pass button rifled in the various twist rates we offer to suit particular accuracy requirements. One-at-a-Time Barrel Making - True, center-to-center barrel turning at a rate that minimizes stress while keeping the bore in the middle. True, center-to-center chamber reaming insures centering and linear alignment of the chamber with the bore. True, center-to-center 11° target crown, applied after finishing, insures that bullets exit the barrel with perfectly even gas pressure. And during installation, each chamber's headspace is set correctly with precise headspace gauges.
Special Accuracy Barrels (See More Detail Above) - Our .223 Remington is set up with 1:12 twist to give best accuracy with varmint bullets from 40-55 gr weight. Our .243 Win is a 1:8 twist so it will shoot off-the-shelf 100 gr ammo with superb accuracy. Same with our 6mm BR... 1:8 twist and throated for 100-105 gr. long distance bullets. 260 Remington shoots a 6.5mm bullet. Our barrels have a 1:8 twist for the most popular 140 gr bullets. And finally, our 308 Win barrel has a 1:12 twist... which is the preferred twist rate of match shooters and their favorite 150-155gr bullets.
