Bipods & Rests

MDT GRND-POD PRS Bipod The MDT GRND-POD was designed to maximize versatility, as well as cost savings, while retaining features that are most important in a precision rifle bipod. The GRND-POD goes far beyond the typical Harris Bipods in features, like...

Harris M-LOK Bipods, Series S, 6-9" BR - Harris M-LOK bipods attach to the M-LOK slots on popular handguards and chassis forends. The S-Type Bipods tilt from side to side so that you can level your rifle as you aim. All Harris bipods fold up and out of...

Harris M-LOK Bipods, Series S, Model L, 9-13" - Harris M-LOK bipods attach to the M-LOK slots on popular handguards and chassis forends. The S-Type Bipods tilt from side to side so that you can level your rifle as you aim. All Harris bipods fold up and...

Harris Bipods S-Type Swivel (tilt) to Compensate for Uneven TerrainMade in America, Shipped from America, Competitively Priced... Don't be fooled by Foreign Copies!- The Harris S-Type Bipods tilt from side to side so that you can level your rifle as you...

Oryx Full Length Forend ARCA Rail- Converts your Oryx chassis stock to mount on bipods, tripods, etc... with the ARCA rail system. Specially contoured to fit the forend taper and M-Lok slots for a perfect flat bottom with ARCA compatible dovetail style...

Accu-Shot Quick-Knob Locking MonopodThe original patented Accu-Shot Monopod is the sandbag for the 21st century offering you the stability and support you need.  Mounts to your buttstock swivel stud and gives the rear of your rifle a steady,...

Original Harris Series 1A2 Bipods - All ModelsThe Foldable, Extendable,... Reliable Bipod... Scroll Down  The "Original" Harris Bipod is still the king of bipods. Its light weight and convenience made it the favorite of military and hunters alike.....

MDT M-LOK ARCA Rail 3.3 Inch Securely attach your rifle to an ARCA mount with the MDT M-LOK ARCA Rail. This handy 3.3 inch ARCA rail attaches to any rifle, handguard, or chassis with M-LOK slots. ARCA Swiss adapters have become the standard for...

Caldwell XLA Bipods are clones or copies of the original Harris Bipods 1A2 notched leg model. "Notched" legs snap lock at full length or can be locked at each notch position in between. Just like the original Harris bipods, these XLA bipods attach to the...

Original Military GradeKMW Pod-Loc™ Harris S Bipod Lever- The KMW Pod-Loc™ Tension Lever replaces the friction tensioning knob on Harris S Series Bipods. Adopted by military and police sniper units all over the world, the Pod-Loc™ has earned a solid...

Harris Bipods #14 Ruger Mini 14 Stud Adapter- Provides a swivel stud bipod attachment for the Ruger Mini 14 and Mini 30. Also Ranch Rifles except series 180 and Ruger folding stock models. Includes a slot for a carrying sling in addition to the swivel...

Harris Bipods #4 Barrel Clamp AdapterClamps to gun barrels and provides a swivel stud and bipod mounting surface. Not recommend for shoulder fired guns. Mounting bipods directly to rifle barrels will affect accuracy and/or change your sight-in zero. Best...

Harris Bipods #9 Adapter for Flat Bottom Forends- Allows mounting any Harris bipod on flat bottomed forends. This adapter holds the bipod in proper alignment. Fits benchrest type forends from 2-4 inches wide. Requires a swivel stud on the forend. E...

Harris Bipods #3 Adapter fits Remington 4, 74, 7400The #3 Bipod Adapter creates a solid swivel stud bipod mounting point on Remington semi-automatic rifles. Attaches at the end of the forend, replaces the forend screw. E. Arthur Brown Company, Inc4088...

Choate Rifle StocksRail Mount Picatinny Bipod Adapter- A picatinny accessory base that mounts in the forend rail of Choate Varmint, Sniper, and Tactical Stocks. It simply slides into the rail and tightens with two screws to lock it in place. Use it...

MDT M-LOK Sling Swivel Stud- Standard Swivel Stud that mounts to any M-LOK slots. Fits Oryx chassis forend as well as buttstock M-LOK slots. Attach a sling or a bipod to this swivel stud.

CMMG 5-Slot M-LOK Picatinny Rail- Mounts on M-LOK surfaces so you can attach Picatinny compatible accessories. Picatinny Compatible RailMounts to M-LOK Handguards, Forends, etc.5 - Slots for Accessories2.375 inches Long.

CMMG 7-Slot M-LOK Picatinny Rail- Mounts on M-LOK surfaces so you can attach Picatinny compatible accessories. Picatinny Compatible RailMounts to M-LOK Handguards, Forends, etc.7 Picatinny Slots for Accessories, Bipods, etc.3.06 inches Long.

Original S-Lever® Tensioner for S-Type Harris and Caldwell XLA Bipods - The Harris and Caldwell XLA "S" type bipods allow you to tilt or cant your rifle side to side to level your crosshairs. It's a great system. However, the friction tensioning...

Choate Long Bipod Lug Sliding lug with swivel stud and locking wing nut fits the accessory rail on the bottom of the forend of Choate Sniper and Varmint Stock. Solid and handy swivel stud mounting point for Harris bipods. Wing nut allows you to unlock,...

Choate Short Bipod Adaptor/Swivel Stud  A shorter, lower bipod adapter that fits the forend rail of our Sniper, Varmint and Tactical stocks, lets you install a Harris bipod so that it tightens against the forend so there is not side to side movement...

Harris Bipods #5 Colt AR15 Adaptor Stud- Fits the Colt AR-15 round handguard without modification. Provides a swivel stud bipod mounting point. Swivel is included. E. Arthur Brown Company, Inc4088 County Road 40 NW, Garfield, MN 56332

Harris Bipods #2 Flat Flange AdapterThe purpose of this big headed flange nut is to provide more support for installing a sling swivel stud in thin walled synthetic or plastic rifle forends. Your Harris Bipod attaches to the forend using the sling swivel...

Harris Bipods #2A Flange AdapterThe purpose of this wide headed flange nut is to provide more support for installing a sling swivel stud in thin walled synthetic or plastic rifle forends. Your Harris Bipod attaches to the forend using the sling swivel...

Harris Bipods #2R Radiused Flange AdapterThe purpose of this big headed flange nut is to provide more support for installing a sling swivel stud in thin walled synthetic or plastic rifle forends. Your Harris Bipod attaches to the forend using the sling...

Harris Bipods #6 Euro Rail Stud Adapter- Slides a swivel stud into the adapter rail on the bottom of target rifle forends. This one fits the European sized rail slot (about 3/8 inch). It has a lock screw to hold it in position when your bipod is not...

Harris Bipods #6A USA Rail Stud Adapter - Slides a swivel stud into the accessory rail on the bottom of target rifle forends. This one fits the USA sized rail slot (about 5/16 inch). It has a lock screw to hold it in position when your bipod is not...

Harris Bipods #8 XP100 Plastic Stock Stud Adapter - Solid bipod mounting swivel stud kit for the Remington XP100 handgun. Original plastic stocks for the Remington XP100 can be adapted to the Harris bipod with this kit. IN addition to the special stud,...

This narrow front bag fits The Rock Shooting Rest and is pictured in the middle above. Bags come unfilled for more economical shipping. See all of our shooting rests, bags, and bipods at our Bipods and Rests Page.

$15 General Installation Charge for installing a #2 Harris Bipod Adaptor on a TC Composite Forend. Order the Adaptor seperately and forend seperately.

Oryx Sling Swivel Stud Assembly- Original Self Threading Swivel stud that screws into the existing forend hole on older Oryx Chassis forends. New Oryx chassis will need a backing nut to attach this stud to the forend hole. For use in sling attachment as...

Universal Swivel Stud Kit   Includes 1 machine screw swivel stud and 2 wood screw swivel studs. Usually the machine screw stud goes in the forend and is backed by the nut (included) and shortened to fit. The wood screw stud usually goes in the...

Harris Bipod Adapter This Harris style bipod adapter has a retractable sling stud for mounting Harris and most other folding bipods onto a standard Picatinny/Weaver/STANAG rail. It's made of 6061-T6 aluminum and measures 2" in length. More form fitting...

Harris Bipods #7A Spacer Adapter- An angled rubber spacer that may allow mounting of bipods on thin forends and schnable forends. Simple design is reversible to change the angle of your bipod. E. Arthur Brown Company, Inc4088 County Road 40 NW, Garfield,...