Record Breaking CZ-455/457 Accuracy BarrelEABCO 17 HMR Barrel Out Shoots Best 17 HMR Rifles at 100 Yards Recently Dwight B. put our new 17 HMR CZ-455/457 barrel to an Accuracy Test that beat the performance of the best 17 HMR rifles in the world. He shot...

EABCO CZ-457 Accuracy Barrel® 22 LR - 24" Stainless Steel Upgrade your CZ 457 with our precision-engineered 24" stainless steel barrel, featuring our EABCO Match 22 LR chamber, 1:16 twist rate, and a heavy contour that tapers from .860" to .820"...

TC Contender and G2 Headspace Shims Headspace is the distance from head of a cartridge to the breech face. You can fine tune the headspace of your G1 or G2 Contender with these "shims". The SAAMI specified headspace allows up to .010" of variance in the...

T/C Contender PartsParts to fit G1 and G2 Contenders, SSK-50 270-CRC14 - Firing Pin Bushing, Contender, G2, SSK-50 270-CRC15 - Firing Pin Rimfire, Contender, G2, SSK-50 270-CRC15A - Firing Pin Centerfire, Contender, G2, SSK-50 270-CRC16 - Bushing Screw,...

T/C Contender/SSK-50 Barrel Hinge PinThis stainless steel barrel hinge pin is a direct replacement for the Thompson Center Contender and SSK-50 hinge pins. Made from precision ground "drill rod" to fit closely for accuracy while allowing removal to swap...

TC Contender/Encore .45 Colt/.410 Ga. Choke Tube These are precision reproductions of the internal choke tube that fit rifled Thompson Center .45 Colt/.410 ga. shotgun pistol barrels. If you've lost your original 45-410 choke tube, this one will replace...

TC Contender Pistol Accuracy Barrels ® by EABCOStandard Model, Match Grade Barrels, 10" Pistol Length, Stainless- Our TC Contender Accuracy Barrels® fit the TC Contender, G2 Contender, and SSK-50 frames. Manufactured by E. Arthur Brown Company...

17 HMR Blue TC Contender/SSK-50/G2 Accuracy Barrels® Twist 1:9, Standard Model, Match Grade Barrels by EABCO- We bring considerable experience to the making of our 17 HMR barrels. It all started with the 357 Super Mag from Handgun Metallic...

30-30 Winchester Blue TC Contender/SSK-50/G2 Accuracy Barrels® Twist 1:10, Standard Model, Match Grade Barrels by EABCO- We bring considerable experience to the making of our 30-30 Winchester barrels. It all started with the 357 Super Mag from...

Lothar Walther 16.5" Stainless Steel Barrel for CZ-457 / CZ-455 - Threaded .22 LR Enhance the accuracy and performance of your CZ-457 or CZ-455 rifle with this premium Lothar Walther 16.5" Stainless Steel Barrel. Designed for precision shooters, this...

T/C Contender and G2 Barrel Pivot Hinge PinsThis barrel hinge pin is a direct replacement for the Thompson Center Contender and G2 Contender hinge pins.  Made from precision ground "drill rod" to fit closely for accuracy while allowing removal to...

Encore Grip Bolt Set- the shorter 1.5” bolt fits MOST synthetic buttstocks, while the longer 2” bolt fits MOST laminate and wood buttstocks, but some laminates/wood need the shorter, and vice versa with synthetic. One of them will fit to...

TC Encore/Contender Barrel Locking Bolt Spring- This is the coil spring that powers the Locking Bolts in the barrel underlug of Thompson Center Encore Pro Hunter and Contender. The locking bolts are compressed against this spring when you squeeze the...

T/C Extractor Leaf Spring by EABCOThis is the little leaf spring that fits against the bottom of rimless extractors on Thompson Center accessory barrels. Rimless cartridges such as 223 Remington or 308 Winchester have a special extractor that flexes...

T/C Contender 45-70 Extractors are Tool Steel by EABCOThese 45-70 extractors are used for TC Contender and G2 Contender barrels that are chambered for the 45-70 Government cartridge. Our extractors are precision machined from tool steel forging. We...

T/C Contender 44 Magnum Extractors are Tool Steel by EABCOThese 44 Magnum extractors are used for TC Contender and G2 Contender barrels that are chambered for the 44 Remington Magnum (44 Mag) cartridge. Our extractors are precision machined from tool...

T/C Contender 30-30 Winchester Extractors are Tool Steel by EABCOThese 30-30 Winchester extractors are used for TC Contender and G2 Contender barrels that are chambered for the 30-30 Winchester cartridge. Our extractors are precision machined from tool...

T/C Contender 22 Magnum Extractors are Tool Steel by EABCOThese 22 Magnum extractors are used for TC Contender and G2 Contender barrels that are chambered for the 22 Winchester Magnum Rimfire (22 WMR) cartridge. Our extractors are precision machined from...

TC Contender Underlug Roll Pin Kit- Replacements for the roll pins used in the underlug assembly of Thompson Center Contender and G2 Contender barrels. Includes 6 large and 3 small pins to fit both TC factory barrels and EABCO Accuracy Barrels.

T/C Contender 357 Magnum Extractors are Tool Steel by EABCOThese 357 Magnum extractors are used for TC Contender and G2 Contender barrels that are chambered for the 357 Magnum, 357 Maximum, 38 Special, 7mm SuperMag, and any other cartridges that have the...