Contender G2 Stock Set - Shade VariesCamo Laminate Factory Style Buttstock and Forend Set - Custom made for the Thompson Center G2 Contender. Standard factory styling but made of rich Camo Laminate hardwood with a weather resistant satin...

Contender G2 Stock Set - Shade VariesBrown Laminate Factory Style Buttstock and Forend Set- Custom made for the Thompson Center G2 Contender. Standard factory styling but made of rich Brown Laminate hardwood with a weather resistant satin finish. -...

Contender G2 Stock Set - Shade VariesGray Laminate Factory Style Buttstock and Forend Set - Custom made for the Thompson Center G2 Contender. Standard factory styling but made of rich Gray Laminate hardwood with a weather resistant satin finish. -...

Volquartsen VC2AK-S-ST Accurizing Kitfor Ruger Mark II, III, and 22/45, Silver/Stainless Trigger- Drop In Target Grade Accurizing Kit with silver extended bolt release and stainless trigger to provide a crisp, clean 2.25lb trigger pull (pull may vary...

Volquartsen VC2AK-S Accurizing Kitfor Ruger Mark II, III and 22/45, Silver/Black- Drop In Target Grade Accurizing Kit with silver extended bolt release and black trigger to provide a crisp, clean 2.25lb trigger pull (pull may vary slightly due to factory...

Picatinny Rail Scope Base for TC Contender/G2 Fits TC Contender and G2 barrels. This new mount provides milspec Picatinny mounting compatibility for your Original Contender/SSK-50 and/or G2 barrels. It fits the factory barrel 4-hole scope mount pattern...

Ruger Mk I, II, III HSS Ease-Of-Assembly Upgrade- The HSS (Hammer Strut Support) is a parts upgrade that greatly improves the ease of assembly for Ruger MK I,  II, and III pistols (It DOES NOT fit ANY 22/45, nor ANY Mk IV). It simply eliminates the...

Halo Charging Ring for Ruger® Mk III/Mk IV® & 22/45   The Halo is an easy to grip "pull ring" that attaches to your Ruger Mk III/Mk IV bolt. It makes it easy to pull the bolt back for anyone... Big or small, strong or weak...

Volquartsen Accessory Rail for LLV Barrels  Under barrel Picatinny accessory rail fits both Picatinny and Weaver style accessories. Mounts with two 8-32 screws under LLV barrels. Newer Volquartsen LLVs are pre-drilled and tapped. We can...

TC Contender Barrel Dovetail Locks (Qty 2) by EABCO  Dovetail locks install into slots under G2 and Contender barrels and provide forend mounting points. Precision machined from tool steel by E. Arthur Brown Company, Inc and replaces TC...

Tandemkross Mark III (22/45) Hammer Bushing for Magazine Disconnect-Stainless SteelCompatibility: MKIII -ALL MODELS MKIII 22-45 MKIII 22-45 Competition MKIII 22-45 Government Target MKIII 22-45 Target MKIII Competition MKIII Government Target MKIII...

Hogue MKII/MKIII & 22/45 OverMolded Rubber Grip Finger Grooves Durable synthetic rubber, perfect for recoil absorbing without affecting accuracy.  Modern molding process and flexibility of materials results in superior grips that out perform...

Volquartsen Mk II, III and 22/45 Competition KitAlso Converts Mk II, III and 22/45 Pistols to Eliminate the Magazine Disconnect  Trying to figure out which parts are needed to take the Ruger MKIII and 22/45 to the next level? Look no...

Volquartsen Mk II, Mk III and 22/45 Accurizing Kit Black/BlackAlso Converts Mk III Pistols to Eliminate the Magazine Disconnect  Features a Black Extended Bolt Release and Black Trigger. Complete drop-in kit for the Ruger MKII and MKII 22/45 to...

Volthane Grips for Ruger the Ruger Mk III PistolFamous "Volthane" grips by Volquartsen fit the Ruger Mk III (will not fit the 22/45 models). Designed to position your hand exactly the same every time you grip the pistol, these grips are an aid to...

Volquartsen Target Hammer w/BushingFor Ruger® Mark II and Mark III- The MKII and MKIII Target Hammer is a complete drop-in item that is wire EDM-cut from hardened tool steel. The target hammer will not only reduce your trigger pull but will also...

Volquartsen Target 22 Style Frame fits Ruger MKII and MKIIIA Complete Aluminum Lower Frame Replacement... Includes Volquartsen Accuracy System Internal PartsOur Volquartsen Custom Target Frame is CNC machined from aluminum alloy. Weighing only 7.1 oz, it...

Universal Forend Screw KitReplacements For Original and Contender G2 Forends- The screws are in lengths we use here in the shop. The spacer washers solve the problem of screws bottoming out before the forend is completely tight. With this kit, you should...

Ruger® Brand Scope Mount for Mk I, II, II, and 22/45 Pistols  Genuine Ruger factory scope mount for your Ruger Mk I, II, III, and 22/45 Pistols. Fits the three screw hole pattern and mounts in front of the rear sight. Features a narrow "22 ring"...

Extended Eye Relief Scope Base for TC Contender/G2  Fits TC Contender and G2 barrels. This new mount extends forward to give longer eye relief when mount a riflescope on your Original Contender/SSK-50 and/or G2 barrels. It fits the factory barrel...