The Ultimate Trigger Kitfor the Ruger MKIV & MKIV 22/45 RedThis “Ultimate” Kit for Ruger® Mark IV™ & Mark IV 22/45™ is a matched set of upgrade parts - DO NOT use any other brand of sear and hammer with the TANDEMKROSS...

TC Encore Pro Hunter Trigger Spring Kit Do It Yourself Clean Up and Tune Up Kit That Also Lightens Trigger Pull Lighter Trigger/Sear Spring - Reduce Trigger Pull from 5.75 lbs to Aprox. 2.5-3 lbs* SPEEDLOCK Hammer Spring - Gives More Reliable Primer...

 YoDave CZ-452 Plus 10 Striker Spring Upgrade your worn or weak CZ-452 striker spring with this new 10 percent heavier striking spring for a more consistent primer strike and ignition. Also fits 453, 455, and 513 models. All benchrest...

YoDave CZ-455 Trigger Shim and Spring KitImproves the Trigger Pull of CZ-455, CZ-452 and BRNO Model 2, 4, and 5 Rifles This kit removes the creep and lightens the trigger pull weight by the use of shims and new springs. Kit includes 4 shims and 4 new...

Volquartsen Mk IV and Mk IV 22/45 Competition Kit Also Converts Mk IV and Mk IV 22/45 Pistols to Eliminate the Magazine Disconnect   Trying to figure out which parts are needed to take the Ruger MKIV and 22/45 to the next level? Look no...

Volquartsen HP Action Kit for 10/22  This kit consists of Volquartsen upgrade parts including: Target hammer (including shims and bushings), hammer spring, target disconnector, target sear and target trigger (including polished plunger and spring)...

Ruger 10/22® Competition Trigger Kit by Power Custom - A professional action tune-up for your Ruger 10/22 that you can afford... and you can  "do-it-yourself". - Includes every important part from the insides of an expensive modular trigger...

Remington 870 Trigger Tune Spring Kit This kit comprises of both a replacement hammer spring as well as five different trigger springs ranging in pull weight from 1.25lb to 5lb. The hammer spring is made from stainless steel, and the trigger springs are...

Savage AXIS Pro Trigger Kit An Economical and Effective Tune Up for Original Savage Axis Triggers.   Reduce Factory 6 lb Trigger Pull Up To 40%Includes Spring for 1.5 lbs Trigger Return Includes Spring for 2.5 lbs Trigger Return Includes Spring for...

TC Encore Pro Hunter Trigger Spring Kit Do It Yourself Clean Up and Tune Up Kit That Also Lightens Trigger Pull Lighter Trigger/Sear Spring - Reduce Trigger Pull from 5.75 lbs to Aprox. 2.5-3 lbs* Heavy Duty Hammer Spring - Gives More Reliable Primer...

Pistol Competition Kit for MK IV, Gold Trigger Trying to figure out which parts are needed to take the Ruger MK IV or MK IV 22/45 to the next level? Look no further than the Pistol Competition Kit. This kit includes our MK IV Accurizing Kit and Bolt...

The Ultimate Trigger Kit for the Ruger MKIV & MKIV 22/45 BlackThis “Ultimate” Kit for Ruger® Mark IV™ & Mark IV 22/45 is a matched set of upgrade parts - DO NOT use any other brand of sear and hammer with the TANDEMKROSS...

Volquartsen Target Hammer Kit for the Ruger 10/22- The target hammer kit was designed to give the factory Ruger 10/22 a superb “trigger job” by simply replacing the factory hammer (Not for BX-Trigger). No stoning or fitting is required. Reduces trigger...

Jard 3-Position Safety for Savage 10/110 RiflesThe JARD 3-Lever Triggers for Savage 10/110 require a 3 position safety. Check your rifle. If your Savage 10/110 series rifle has a 2-position safety, you will need to install one of these 3-position...

Timney 49ER Ambidextrous Safety fits AR15- The Timney 49er is a 49 or 90 degree AR15 safety (Ambidextrous). It can be used in either the normal 90 degree or for ultra quick changes a 49 degree short throw for quick and easy manipulation. In addition,...

 The TANDEMKROSS “Thunder” Hammer for SW22® Victory™ is a drop-in replacement hammer that significantly reduces SW22® trigger pull weight. The “Thunder” SW22® Victory™ hammer is precision-machined from hardened S7 tool steel for improved...

Volquartsen Target Sear for Ruger® MK II™ and Mk III™- This specially designed sear provides the shooter with a shorter, faster, cleaner breaking trigger pull. The sear is wire EDM-cut from hardened A2 tool steel.Does NOT Fit: Ruger MKIV Pistols 

Tandemkross "Victory" Trigger Replacement for Browning BuckmarkFeatures:Flat faced for better control and feelTextured Face for better grip100% Adjustable for pretravel and overtravelLightweight skeletonized designFits All Browning Buckmark Pistols - The...

Volquartsen Ruger MK IV® Accurizing Kit - Stnls TriggerThis complete drop-in kit comes with our CNC Machined Disconnector/Trigger Bar, Target Hammer, Hammer Bushing, Target Sear, Target Trigger with plunger and spring. It also comes with pretravel...

Volquartsen VC2AK-S Accurizing Kitfor Ruger Mark II, III and 22/45, Silver/Black- Drop In Target Grade Accurizing Kit with silver extended bolt release and black trigger to provide a crisp, clean 2.25lb trigger pull (pull may vary slightly due to factory...