T/C Encore 300 Win Mag Extractors are Tool Steel by EABCO   The 300 Win Mag extractor is used for TC Encore and Pro Hunter barrels chambered in 300 Winchester Magnum and 7mm Remington Magnum. Our extractors are precision machined...

T/C Encore 35 Whelen Extractors are Tool Steel by EABCO   The 35 Whelen extractor is used for TC Encore and Pro Hunter barrels chambered in 35 Whelen. Our extractors are precision machined from tool steel billet. We...

T/C Encore 6.5x284 Extractors are Tool Steel by EABCO   The 6.5x284 extractor is used for TC Encore and Pro Hunter barrels chambered in 6.5 x 284 Norma, .284 Winchester, and anything else based on .284 Winchester brass. Our...

T/C Encore PPC Extractors are Tool Steel by EABCO   The PPC extractor is used for TC Encore and Pro Hunter barrels chambered in 6mm PPC and 22 PPC. Our extractors are precision machined from tool steel billet. We...

T/C Encore Hornet Extractors are Tool Steel by EABCO   The "Hornet" extractor is used for several different TC Encore and Pro Hunter chamberings... 22 Hornet, 22 K-Hornet, 17 Hornet, 17 Ackley Hornet... Basically any cartridge that is...

Volquartsen Accessory Rail for LLV Barrels  Under barrel Picatinny accessory rail fits both Picatinny and Weaver style accessories. Mounts with two 8-32 screws under LLV barrels. Newer Volquartsen LLVs are pre-drilled and tapped. We can...

TC Contender Barrel Dovetail Locks (Qty 2) by EABCO  Dovetail locks install into slots under G2 and Contender barrels and provide forend mounting points. Precision machined from tool steel by E. Arthur Brown Company, Inc and replaces TC...

Colt AR15/M16 Lower Receiver Offset Adaptor PinEasily adapts Colt large pin lowers to fit standard small pin AR15 upper receivers, ensuring a precise, tight fit. Key Features: Compatibility: Designed to bridge older Colt large pin lowers with modern...

AR10 Accuracy Barrel® 6.5 Creedmoor by EABCO- Our DPMS compatible 6.5 Creedmoor AR-10 Accuracy Barrel® is a Heavy Profile, Long Range PRS style upgrade that will maximize the range and accuracy of your AR-10 rifle. We've engineered it around the...

Volquartsen Target Sight Setsfor Original LLV and New MKIV LLV Uppers- Target Sights Set (Front and Rear) to fit Volquartsen LLV and LLV-4 Black Mamba Uppers. Includes Patridge Front Sight and Target Adjustable Rear Sight. Fits Volquartsen 4.5 inch LLV...

  A JARD Replacement Trigger is designed and intended for you to be able to install it yourself. However, if you would prefer to have EABCO gunsmiths install it for you, we would be more than happy to do it and of course we'll do a good job. Please...

Volquartsen Exact Edge Extractor- Replaces stamped sheet metal Ruger factory Mk I, II, Mk III, Mk IV, 10/22, and 10/22 Magnum extractor with a closer fitting, sharper edged, machined tool steel extractor for better function and reliability. The Exact...

TC Encore Pro Hunter Scope Base Precision machined scope mounting base for TC Encore, Pro Hunter, Omega, Triumph and Impact barrels. Standard 4-Screw mounting with option for FREE 6-Screw mounting. Super rigid, precisely straight Weaver style scope base...

Savage Plastic Magazine Well Molded Plastic "Bottom Metal" for Version II Choate Stocks This short action magazine well fits magazines where the latch is part of the magazine. If your Savage rifle has a plastic stock with the magazine well molded into...

AR-15 Lower Completion Parts KitSolid Quality, Economically Priced, Everything You Need!Assemble these parts into an AR15 lower receiver and that receiver will be complete... All you will need to build the rest of your AR-15 is a stock, a barreled upper,...

Volquartsen Mk II, III and 22/45 Competition KitAlso Converts Mk II, III and 22/45 Pistols to Eliminate the Magazine Disconnect  Trying to figure out which parts are needed to take the Ruger MKIII and 22/45 to the next level? Look no...

Savage Barrel Lock Nut Lock nut to secure barrel to receiver. Screw the barrel in to set headspace, then tighten the lock nut. Precision machined to close tolerances for optimal fit, alignment, and concentricity. This nut features squared grip notches to...

Volquartsen 10/22 Replacement Receiver CNC Machined Stainless steel model is machined from billet 416 material Aluminum (Superlite) model is machined from billet 6061 aluminum alloy and Type III Hard Anodized   Volquartsen receivers are...

EABCO 24" National Match AR-15 Bull Barrel – 5.56 NATO/.223 Rem Wylde Upgrade your AR-15’s performance with this 24" Stainless Steel Fluted Bull Barrel from EABCO. Engineered for accuracy and durability, this barrel is National Match Grade...

Ruger 10/22 Thread Protector 1/2 x 28 Thread, .920 Dia by .400 Length - We've had so many compliments on our 10/22 Accuracy Barrel Smooth Steel Thread Protectors, we decided to offer them as a separate accessory. Made to fit rifle barrels with threaded...