Remington 700 Accuracy Barrel® 300 Win Mag, 1:10, Blue Fits Remington 700 Series Rifles with No Modifications*. Shank Thread 1 1/16 -16 TPI (Standard Remington) Easy Installation and Headspacing with Remage Barrel Nut System (Included). 26" length,...

Stainless AR-15 Fluted HBAR Barrel - National Match Grade Upgrade your AR-15 with our 24" Stainless Steel Fluted HBAR Barrel, designed for precision shooting with 5.56 NATO and .223 Rem (Wylde) compatibility. Featuring an 11° target crown and a 1:9...

Volquartsen MKIV 22/45 Mag Release with two Base Pads- The ultimate competitors edge! Our new Extended Magazine Release for the MKIV and a 2-Pack of MKIV 22/45 Magazine Base Pads. The new Mag Release allows magazines to sit a little higher for better and...

Colt AR15/M16 Upper Adaptor Offset BushingAdapt your Colt large pin upper to fit your small pin lower with this offset adapter bushing.  On the Colt AR15/M16, the front pin that joins the upper receiver to the lower receiver is larger than the...

EABCO Ruger 10/22 Scope MountPrecision Machined Weaver Style Scope Mounting Base Silver  Our EABCO Ruger 10/22 Scope Mounting Base is precision machined to optimize the base for the very best ring engagement, alignment, and rigidity. No molding or...

Ruger MKIV Frame Lug This lug is precision machined for improved fit. Slight variances to the factory lug (as shown with the yellow circle in the additional image) can cause unnecessary wear to the Mark IV upper as well as aftermarket uppers like the...

FireFly Subsonic 10/22 BoltThe Firefly Bolt upgrades your Ruger® 10/22® for optimal subsonic performance.This CNC-machined, Type III hard-anodized aluminum bolt is lightweight and designed to cycle with a wide range of subsonic ammo, from CCI® Quiets...

EABCO 22 ARC Barrel for AR15 Rifles This EABCO 24" 22 ARC HBAR Accuracy Barrel® is crafted for AR-15 rifles, maximizing velocity and precision. Perfect for long-range shooting, this barrel is built to meet and exceed SAAMI specs, providing remarkable...

AR-15 A2 Buttstock Screw A2 buttstock screw with the vent hole down the middle. E. Arthur Brown Company, Inc 4088 County Road 40 NW, Garfield, MN 56332

T/C Contender/SSK-50 Barrel Hinge PinThis stainless steel barrel hinge pin is a direct replacement for the Thompson Center Contender and SSK-50 hinge pins. Made from precision ground "drill rod" to fit closely for accuracy while allowing removal to swap...

T/C Encore and Pro Hunter Barrel Hinge Pin, StnlsThis stainless steel barrel hinge pin is a direct replacement the Thompson Center Encore and Pro Hunter hinge pins. Made from precision ground "drill rod" to fit closely for accuracy while allowing removal...

TC Contender/Encore .45 Colt/.410 Ga. Choke Tube These are precision reproductions of the internal choke tube that fit rifled Thompson Center .45 Colt/.410 ga. shotgun pistol barrels. If you've lost your original 45-410 choke tube, this one will replace...

Stainless TC Encore Accuracy Barrel® - 360 Buckhammer 26" by EABCO Experience unmatched precision with the 360 Buckhammer TC Encore Accuracy Barrel®, meticulously crafted by E. Arthur Brown Company. This 26" heavy contour barrel, finished in...

Blue TC Encore Accuracy Barrels® by EABCO 360 Buckhammer 1:12, Standard Model, Match Grade Barrel TC Encore Accuracy Barrels® fit the TC Encore and Pro Hunter frames. Manufactured by E. Arthur Brown Company with special attention to detail, precision,...

Volquartsen Mk IV and Mk IV 22/45 Competition Kit Also Converts Mk IV and Mk IV 22/45 Pistols to Eliminate the Magazine Disconnect   Trying to figure out which parts are needed to take the Ruger MKIV and 22/45 to the next level? Look no...

Volquartsen HP Action Kit for 10/22  This kit consists of Volquartsen upgrade parts including: Target hammer (including shims and bushings), hammer spring, target disconnector, target sear and target trigger (including polished plunger and spring)...

Volquartsen Lightweight Carbon Fiber 10/22 Barrel The Lightweight Carbon Fiber Barrel sets the standard for a lightweight barrel - bull barrel match accuracy at half the weight! A stainless steel barrel fitted with a woven carbon fiber tube creates an...

Thread Protector, 1/2x28, .820 Dia., Stainless, Knurled A stainless knurled thread protector to protect and beautify the threaded muzzle of your barrel. Recessed threads on the back side assure a tight and seamless fit. Beautifully knurled for handy...

6.8 Rem SPC AR15 Bolt Carrier Group Shot Peened Black Nitride Finish w/No Logo Fits 6.8 Rem SPC, 400 Legend, 224 Valkyrie, etc.    Precision machined complete BCG (Bolt Carrier Group) with Black Nitride finish for excellent durability and...

Our Mil-Spec Rifle Length Buffer Tube Kit consists of a 10" fixed position buffer tube, heavy 5.6 oz buffer assembly and an 11.5" pre-loaded steel spring. The buffer tube is made of T6-6061 aluminum and is designed to fit any A1/A2 fixed position...