TriggerTech Diamond fits AR-15, Straight Flat Black TriggerAdjustable from 1.5 to 4 lbs. the TriggerTech "Diamond" AR-15 Trigger is an advanced shooter trigger replacement for the milspec AR-15 trigger. It gives you all of the advantages of FRT Friction...

Timney AR-10 Competition Trigger If you’re looking to get the most out of your AR-10 for your next competition then look no further, this is the trigger you need. With an incredibly smooth pull, a crisp feel, and reliability at every turn,...

Encore Pro Hunter Speed Breech Plug (Original) - Originally introduced on muzzleloader barrels with the Pro Hunter label, the original Speed Breech combines engine piston style sealing rings with an O-ring and a quicker breechj plug removal system...

TC Encore ProHunter FX Speed Breech 3 Speed Beech 3 breech plugs require no tools, and spin out by hand for easy cleaning.  The TC Encore FX is the fixed version, which requires a specific FX Speed Breech 3 plug.  Replace your existing breech...

TC Encore Pro Hunter Trigger Spring Kit Do It Yourself Clean Up and Tune Up Kit That Also Lightens Trigger Pull Lighter Trigger/Sear Spring - Reduce Trigger Pull from 5.75 lbs to Aprox. 2.5-3 lbs* SPEEDLOCK Hammer Spring - Gives More Reliable Primer...

Colt AR15/M16 Upper Adaptor Offset BushingAdapt your Colt large pin upper to fit your small pin lower with this offset adapter bushing.  On the Colt AR15/M16, the front pin that joins the upper receiver to the lower receiver is larger than the...

SSK-50 Hammer Fits Original Contender and SSK-50 Receivers Fits SSK-50 firearm platforms May be compatible with TC Contender®, but due to their extreme dimensional variation, SSK cannot guarantee this. Please contact Smith & Wesson for...

 YoDave CZ-452 Plus 10 Striker Spring Upgrade your worn or weak CZ-452 striker spring with this new 10 percent heavier striking spring for a more consistent primer strike and ignition. Also fits 453, 455, and 513 models. All benchrest...

Volquartsen Mk IV and Mk IV 22/45 Competition Kit Also Converts Mk IV and Mk IV 22/45 Pistols to Eliminate the Magazine Disconnect   Trying to figure out which parts are needed to take the Ruger MKIV and 22/45 to the next level? Look no...

Volquartsen HP Action Kit for 10/22  This kit consists of Volquartsen upgrade parts including: Target hammer (including shims and bushings), hammer spring, target disconnector, target sear and target trigger (including polished plunger and spring)...

Marlin Trigger Replacement Black Drop-in universal Marlin trigger upgrade reduces trigger pull weight, removes flop; broader, flatter trigger face and angle for a more natural and comfortable trigger pull. Please note that a two piece trigger will still...

JARD Gen III Trigger for the CZ 457 This new Generation III trigger takes the CZ 457 Trigger up into a new level of refinement. Three models come Drop-In Ready for match grade trigger pulls of 3-6 oz, 7-10 oz, and 11-12 oz. Each model is screw adjustable...

Savage AXIS Pro Trigger Kit An Economical and Effective Tune Up for Original Savage Axis Triggers.   Reduce Factory 6 lb Trigger Pull Up To 40%Includes Spring for 1.5 lbs Trigger Return Includes Spring for 2.5 lbs Trigger Return Includes Spring for...

TC Encore Pro Hunter Trigger Spring Kit Do It Yourself Clean Up and Tune Up Kit That Also Lightens Trigger Pull Lighter Trigger/Sear Spring - Reduce Trigger Pull from 5.75 lbs to Aprox. 2.5-3 lbs* Heavy Duty Hammer Spring - Gives More Reliable Primer...

Volquartsen Exact Edge Extractor for Remington 870 and 1100The Exact Edge Extractor is manufactured through an EDM process (not an inferior MIM process) to produce exacting tolerances. The new extractor will not lose its edge under impact like...

TriggerTech Primary fits Remington 700, Traditional Curved Trigger w/BRAdjustable from 1.5 to 4 lbs., the TriggerTech "Primary" a general use trigger replacement over the Remington factory trigger. It gives you all of the advantages of FRT Friction...

TriggerTech Black AR Safety- Designed to maximize performance with TriggerTech AR triggers our patented AR Safety features 45° and 90° interchangeable throws, our own proprietary ball tip detent pin and the grip does not have to be removed to install /...

TriggerTech Special fits Remington 700, Curved Black Trigger w/BR   Adjustable from 1 to 3.5 lbs., the TriggerTech Special is an upgrade to the TriggerTech Primary Remington factory trigger replacement. It gives you all of the advantages of FRT...

TriggerTech Adaptable fits AR-15, Curved Black Trigger   Adjustable from 2.5 to 5 lbs. the TriggerTech "Adaptable" AR-15 Trigger is a general use trigger replacement for the milspec AR-15 trigger. It gives you all of the advantages of FRT Friction...

TriggerTech Adaptable fits AR-15, Straight Flat Stnls Trigger   Adjustable from 2.5 to 5 lbs. the TriggerTech "Adaptable" AR-15 Trigger is a general use trigger replacement for the milspec AR-15 trigger. It gives you all of the advantages of FRT...